DC input PoE

DC input PoE
PT-PSE105G-E Indoor Single-port PoE Mid-span
Standard
1. Indoor using, 48VDC/650mA, PoE port 6KV(10/700us) surge-protection
2. Boost design, input voltage: 10-24VDC
3. Wide- temperature design: -40℃- +65℃
4. Rail slot on the back, can be fixed at guide rail
1. Boost PoE injector
PT-PSE105G-E connected with switch to exchange data, supply power through Cat5e cable to remote PD, effective distance is 100m.
2. Intelligence chip is inside, detective PD before supply power.
PT-PSE105G-E with intelligence chip inside, detective PD before supply power, if the PD is compliant with IEEE802.3af/IEEE802.3at standard，supply 48VDC power, if not do not supply power, avoid of device destroy and increase safety level.
3. External solar power supply system connected
Product allows 10-24VDC input and solar power panel is acceptable, output power is 30W, output current is 650mA, could powered for high power request PD, such as outdoor wireless base station, wireless AP, network cameras.
4. Better ambient temperature adaptation, convenience to fix.
PT-PSE105G-E’s ambient temperature is good，-40℃～＋65℃；with rail slot，can be fixed at guide rail.
1. Input voltage: 10-24VDC
2. Output power: 30W
3. output current: 650mA
4. Voltage accuracy: 48VDC±5%
5. Load adjusted rate: 48VDC±1%
6. Operating temperature: -40℃～＋65℃
Standard
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
- IEEE802.3af/802.3at Power over Ethernet standard
- RoHS Compliant
- WEEE Compliant,CE/FCC
- FCC Part 15,Class B
- EN 55022 Class B
- MTBF:100,000 hours.@25℃

PoE Power Output
- Port No: 1
- Power Pin: 4/5(+),7/8(-) or 3/6(+),1/2(-)
- Data Rate: 10/100/1000Mbps
- Output Voltage: 48V
- Output Current: 650mA
- Input Voltage: 10-24VDC
- Input Current: 4A

Dimension & Wight
- Dimension: 115mm X 75mm X 32mm
- Weight: 0.45kg

Physical Interface
- LAN Port: RJ45
- PoE Port: RJ45
- DC Power Port: terminal strip

Environment & Condition
- Operation Temperature: -40℃ to +65℃
- Operation Height: -304.8 meters to 3048 meters
- Operation Humidity: Maximum 90％, Non-condensing

Network signal surge-protection
- Protection Line: 1, 2, 3, 4, 5, 6, 7, 8
- Common-mode surge-protection(10/700us): 6KV
- Clamp voltage(1, 2; 3, 6; 4, 5; 7,8): 7.5VDC

PoE Power Output Surge-Protection
- Different-mode surge-protection(10/700us): 6KV
- Power clamp voltage(4, 5—7, 8): 60VDC
Order Info
PT-PSE105G-E 48VDC output/30W/1000Mbps/surge-protection/4/5(+),7/8(-) or 3/6(+),1/2(-)
Packing Info
PT-PSE105G-E x 1
Product manual x 1