Hot search:
 

Auto Bumper Mold

Click on the image to check the artwork
unit price: negotiable
min amount:
amount:
period for delivery: Consignment Deadline Days
area: Shandong
Expiry date : Long Effective
last update: 2018-09-16 05:24
view count: 174
enquiry
Company Profile
 
 
Product details

Auto Griller/front bumper/back bump mold

Capability

Auto griller mold

Auto front bumper mold

Auto back bumper mold


Griller and Bumper is the most important decoration plastic parts for a beautiful car. Generally there are 3 kinds Auto griller parts, Engine intake griller/ Bumper decoration griller/ Structual buffer griller inside. The most difficult is the welding lines control for auto griller mold. So a perfect CAE analysis for gate number and location become important, valve gate hot tips must be used to adjust the welding lines location. The usually raw material is PP/ABS/ASA , the final surface finishing is very important for this kind of mold, such like texturing, painting , sandblasting, electroplating.


Compared with griller mold, Bumper mold is much bigger, but requirement for surface finishing is lower, Usually there are 2 kinds parting lines for large lifters or not, it is better within 600mm between every 2 gates, and vavle hot tips must be used also. The mold design will take long time to finish, and machining processing is complex also, Inserts must be made to make CNC machining feasible and accurate.

 

The characteristics for such kind exterial decoration mold:

1, Runner and gate location is important, to control surface finishing.

2, mold structure is complex to meet the appearance and functional requirements of the product.

3, Mold is large and long schedule to finish
4, Stable mold structure to ensure mass production.

 

Case study

• Runner&Gate


Professional CAE analysis to decide the gate quantity and location, The gate location is very important for this kind of part

Meetmoulds have rich experience to make the best decision for runner and gates.Balance the flowing and eliminate welding line
Evaluate the packing for pressure and clamping force. Indicate potential air traps and warpage.


• Vents
Good vents for periphery parting line and make venting inserts for potential air trap area. Add vents for welding line area.


• Cooling

Cooling must be sufficient to any molding area, Putting water lines on ejection blocks, inserts, lifters, any of molding inserts
Precise calculation for each water lines efficiency, overall cooling balance,Uniform cooling and high efficiency.

 

• Ejection
Using spring loaded inserts to avoid sample stick to cavity side, with pins, stripper blocks, lifters to successfully eject out the part, Early prevention to stop any sticking risk to lifters, part can be easily fetched out by robot.


• Steel
Cavity steel is usually imported 2738 HRC30-33 hardness, Core steel is usually 718H from Baosteel supplier, Hardness is HRC34-36


• Structural


• Cutting

No rough surface cutting and welding allowed, Usually one-piece electrode will be used to avoid machining step and insure correct shape
Polishing is very important also before texturing is approval


http://www.meetmoulds.com/

Total0bar [View All]  Related Comments
 
More>other products

[ ProductsSearch ]  [ Send Fav ]  [ Share ]  [ Print ]  [ Send Report ]  [ Close ]

 
Home | Products | Suppliers | News | Tradeshow | Sitemap | Message | RSS Feed